URBAN BASES

Click on any of the images below to see larger versions.

This base uses one of the resin pieces from the Urban Basing Kit. It shows how those pieces can be used effectively all on their own. All it needed was some Green Stuff around the edges that I pock-marked to match the resin piece, and a few pieces of medium slate.

Here, I also used a resin piece from the Urban Basing Kit and I used the exact same method as I did on the last base. It also shows that the new resin pieces work great on their own.

One more base with a resin piece from the Urban Basing Kit, with the same treatment.

On this 25mm base, I used some Green Stuff to build up the height of the base. Then, I used a corner of flooring from the new Cities of Death sprues. I also inserted a piece of medium slate into the Green Stuff, followed by fine slate to flock the base.

One last example of a resin piece from the Urban Basing Kit. They're detailed enough that they don't need much beyond a little Green Stuff blending, slate, and paint. This particular resin piece from the kit is great for a 40mm round base.

Next: More Urban Bases
Previous: Introduction