Use a pin vice to drill into the top two posts facing the front of the model. Use an upward angle and go slowly – you do not want to drill straight through the plastic post! Get your hands on some 32-gauge, cloth-wrapped wire. This stuff is available at any floral shop or craft store. It's a bit easier to use compared to plain old string, as it holds its shape and can be bent and twisted as you see fit. Add a drop of superglue to a length of wire and place it in the drilled hole.

Make another hole in one of the front posts that hang over the head of the Mûmak. Cut the wire to fit and glue it in place, then repeat for the adjacent post. Keep adding wires as you see fit on the sides and rear.